FIMAR-SMART

Two blades cutting knife for cutter BC3N

HUNGER Stainless steel hunger system for Fimar 12 / TS meat mincer

HUNGER Transformation of the meat grinder model 12 / AT Fimar into UNGER

ME4050 FIMAR 50 CM MIXER

BT350W Induction plate with wok - Machine with induction cooking system of heat from the plate to the container (metal type) for WOK pot (to be ordered separately).

HUNGER Transformation of the meat mincer model 12/CE Fimar into UNGER

Basket. Half a basket for the deep fryer

Motor overload protection for spiral kneader models SN-CNS-FN.

ME4030 FIMAR 30CM MIXER

ME4040 FIMAR 40CM MIXER

Brass/bronze alloy nozzles for machine for fresh pasta MPF/8N models. Format "CASERECCE" 9x5 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "FUSILLI" Ø 9 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "PAPPARDELLE" Large tagliatelle 16 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "GNOCCHI - NON DI PATATE" Ø 12 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "BUCATINI" Hollow spaghetti Ø 4 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format BIGOLI Ø 3 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "CAPELLI D'ANGELO" "Angel hair" Ø 4 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "SPAGHETTI" Ø 2 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "TAGLIOLINI" Thin tagliatelle 3 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "FETTUCCINE" 8 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format ""CANNELLONE". THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "MACCHERONI" Macaroni Ø 8,5 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

Brass/bronze alloy nozzles for machine for fresh pasta MPF8N models. Format "SPAGHETTI" Ø 2 mm. THE MOULD’S DRAWINGS AND PHOTOS ARE INDICATIVE. THE NUMBER OF THE HOLES DIFFERS IN ACCORDANCE TO THE MODEL

CB Fimar stand for potato peelers and cleaners

Accessory for electric vegetable cutter models FNT. D10x10 disk for vegetable cutter. Accessory for cutting into cubes.

CIP Stand for potato peelers and mops PPF 5-10-18 and LCF 5-10-18 Fimar

Accessory for electric vegetable cutter models 2000R-3000-2500. D8x8 disk for vegetable cutter. Accessory for cutting into cubes.

Accessory for electric vegetable cutter models 2000R-3000-2500. D10x10 disk for vegetable cutter. Accessory for cutting into cubes.

Accessory for electric vegetable cutter models 2000R-3000-2500. D10x10 disk for vegetable cutter. Accessory for cutting into cubes.

MPFT8SF Die WITHOUT HOLES for machine for fresh pasta MPF8 - Die in brass / bronze alloy.

Die for fresh pasta machine model PF80E. Die in brass/bronze alloy. "CASERECCE" format 9x5 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "FUSILLI" format diameter 9 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "PAPPARDELLE" format 16 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. Format "GNOCCHI - NOT POTATO" Ø 12 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "BUCATINI" format Ø 4 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. BIGOLI format Ø 3 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "ANGEL HAIR" format Ø 4 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "SPAGHETTI" format Ø 2 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "SPAGHETTI" format Ø 2 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "TAGLIOLINI" format 3 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "FETTUCCINE" format 8 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. "MACCHERONI" format Ø 8.5 mm. THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE

Die WITHOUT HOLES for fresh pasta machine PF80E - Die in brass/bronze alloy.

Die for fresh pasta machine models PF80E. Die in brass/bronze alloy. Format "CANNELLONE FOR FILLING". THE DRAWINGS AND PHOTOS OF THE DIES ARE INDICATIVE. THE NUMBER OF HOLES CHANGES BASED ON THE MODEL OF THE MACHINE. Ø 30 mm

Knife used in combination with NPD discs for dicing machine mozzarella model TAC. Height 5 mm

Accessory for model blenders FR150P-FR150I-FR2150P-FR2150I. Glass Lexan group with knives. Capacity 1.5 liters.

Accessory for model blenders FR150P-FR150I-FR2150P-FR2150I. Glass Lexan container with shaker. Capacity 1.5 liters.

Knife used in combination with NPD discs for dicing machine mozzarella model TAC. Height 8 mm