TANK-250PLUS Tankerite Plus two-component resin for 25 litre tanks

TANK-250PLUS Tankerite Plus two-component resin for 25 litre tanks
  • TANK-250PLUS Tankerite Plus two-component resin for 25 litre tanks
  • TANK-250PLUS Tankerite Plus two-component resin for 25 litre tanks
  • TANK-250PLUS Tankerite Plus two-component resin for 25 litre tanks

TANK-250PLUS Tankerite Plus two-component resin for 25 litre tanks

of Frama
TANK-250PLUS Tankerite Plus two-component kit with 250 g adhesive base and 84 g catalyst. For tanks up to approx. 25 litres, resistant to oils, fuels and temperatures up to 250°C.
Price:
€40.00pz. + VAT
Gross Price:
€48.80pz.VAT incl.
Listing:
VAT excl.
You Save:
(%)
Also available on quote (if you request at least 2). Please add the desired quantity to your cart.

Description

TANK-250PLUS Tankerite Plus – Two-component resin kit for tanks up to 25 litres

Tankerite Plus TANK-250PLUS is a two-component treatment specifically designed for the restoration and internal coating of rusty and deteriorated tanks, offering excellent adhesion to metal surfaces and resistance to oils and fuels.

Tankerite Plus TANK-250PLUS

Tankerite Plus is a two-component resin designed to create a protective coating on the internal metal surfaces of tanks.

Its formulation provides resistance to oils and fuels and excellent adhesion to metal surfaces.

The PLUS version also offers temperature resistance up to 250°C.

The TANK-250PLUS kit contains two pre-dosed components and is sufficient for treating tanks up to approximately 25 litres.

Main features

  • Two-component Tankerite Plus kit
  • Designed for the restoration of rusty and deteriorated tanks
  • For tanks up to approximately 25 litres
  • Excellent adhesion to metal surfaces
  • Resistant to oils and fuels
  • Temperature resistance up to 250°C
  • Pre-dosed adhesive base and catalyst
  • Mixing ratio: 1:3 by weight
  • Can also be applied by brush or roller in thin coats

DATA SHEET

CodeTANK-250PLUS
ProductTankerite Plus
TypeTwo-component resin
Adhesive base250 g
Catalyst84 g
Mixing ratio1:3 by weight
Indicative tank capacityUp to approx. 25 litres
ResistanceOils and fuels
Temperature resistanceUp to 250°C
Indicative drying timeApprox. 24-48 hours depending on ambient temperature

Tank preparation

  1. Thoroughly degrease the surfaces using nitro solvent or a similar product.
  2. Then add DERUSTER acid and leave it to act for approximately 15 minutes.
  3. Rinse thoroughly with plenty of water.
  4. Dry the tank completely before applying Tankerite Plus.

Directions for use

  1. Add the catalyst to the adhesive base.
  2. Mix thoroughly until the two components are completely blended.
  3. If necessary, dilute by a maximum of 10-20% by volume with anti-fog nitro thinner.
  4. Mix slowly and thoroughly by hand.
  5. Apply the treatment to the internal surfaces.
  6. Drain off any excess Tankerite Plus.
  7. Allow to dry for approximately 24-48 hours, depending on ambient temperature.
NOTE: Tankerite Plus can also be applied by brush or roller in thin coats.

Warnings and safety

The product may cause skin irritation, an allergic skin reaction and serious eye irritation.

It is toxic to aquatic life with long-lasting effects and contains epoxy components which may cause an allergic reaction.

  • Keep out of reach of children.
  • Avoid release into the environment.
  • Wear protective gloves and clothing.
  • Protect eyes and face.
  • Dispose of the product/container in accordance with applicable regulations.

Always read the instructions and warnings on the original product label and packaging before use.

Frequently asked questions – FAQ

What tank capacity is TANK-250PLUS suitable for?
The kit is sufficient for tanks up to approximately 25 litres.

Is Tankerite Plus a two-component product?
Yes. The kit consists of an adhesive base and catalyst.

How much product does the kit contain?
It contains 250 g of adhesive base and 84 g of catalyst.

Are the components pre-dosed?
Yes. The components are supplied pre-dosed according to the specified mixing ratio.

Is Tankerite Plus resistant to fuels?
Yes. The product is specified as resistant to oils and fuels.

What temperature can it withstand?
The PLUS version is specified for temperatures up to 250°C.

How long does it take to dry?
Approximately 24-48 hours depending on ambient temperature.

Does the tank need preparation?
Yes. It must be degreased, treated according to the instructions, rinsed and completely dried.

Can it be applied with a brush?
Yes. It can be applied by brush or roller in thin coats.

Should excess product be removed?
Yes. Excess Tankerite Plus should be drained after treatment.

TANK-250PLUS Tankerite Plus
Two-component kit for tanks up to approximately 25 litres.

Request information or a quotation
TANK-250PLUS €40.00pz. €48.80pz.