The Fimar FR1010RN, model FR1010RN040T, is a professional countertop electric fryer with two independent 12-litre tanks, safety drain taps and separate temperature controls.
It is designed for restaurants, delicatessens, professional kitchens and catering businesses that need two frying zones. Total power is 12 kW, divided into 6 + 6 kW.
The nominal tank capacity is 12 + 12 litres, but this is not the amount of oil to use.
According to Fimar’s specifications, each tank requires between a minimum of 8 litres and a maximum of 10 litres of oil.
| Specification | Per tank | Total |
|---|---|---|
| Nominal capacity | 12 L | 24 L |
| Minimum oil quantity | 8 L | 16 L |
| Maximum oil quantity | 10 L | 20 L |
Important: do not fill each tank with 12 litres of oil. Always observe the minimum and maximum levels specified by the manufacturer.
The twin tank configuration allows the two frying zones to be managed separately using two independent thermostats.
This makes it possible to organise the preparation of different foods and adjust the temperature of each tank to suit operational requirements.
The fryer is equipped with safety drain taps for draining oil from both tanks.
The taps make emptying easier during routine maintenance, in accordance with the manufacturer’s instructions.
The body, tanks and lids are made of AISI 304 stainless steel.
The removable baskets are made of chrome-plated wire mesh. Handles and knobs are covered with heat-insulating material.
The operating temperature is adjustable from 50 to 180 °C.
The approximate time to reach 180 °C is 12 minutes, while the stated frying time is approximately 5 minutes. Actual times depend on operating conditions.
Fimar’s stated hourly output is 11 + 11 kg/h.
The two frying zones, each with 6 kW of power, allow two preparation cycles to be managed separately. Actual output varies depending on the food and operating conditions.
The FR1010RN features removable stainless steel heating elements, support grids and a safety thermostat with a reset button.
Removing the heating elements makes it easier to access the tanks for cleaning as specified by the manufacturer.
The FR1010RN040T model requires a 400 V 3N 50/60 Hz power supply, with a total power rating of 12,000 W.
The specified connection is a red 5-pin industrial plug. The stated protection rating is IP X3.
The machine dimensions are 56.5 × 52/65 × 36 cm (h).
The net weight is 17 kg. The packaging measures 63 × 55.7 × 41 cm, with a gross weight of 19 kg.
| Brand | Fimar |
|---|---|
| Commercial model | FR1010RN |
| Model code | FR1010RN040T |
| Type | Twin tank countertop electric fryer |
| Number of tanks | 2 independent tanks |
| Nominal tank capacity | 12 + 12 L |
| Minimum oil capacity | 8 + 8 L |
| Maximum oil capacity | 10 + 10 L |
| Total oil quantity | 16–20 L |
| Power | 6000 + 6000 W |
| Power supply | 400 V 3N |
| Frequency | 50/60 Hz |
| Stated hourly output | 11 + 11 kg/h |
| Operating temperature | 50–180 °C |
| Approximate time to reach 180 °C | Approximately 12 minutes |
| Approximate frying time | Approximately 5 minutes |
| Body | AISI 304 stainless steel |
| Tanks | AISI 304 stainless steel |
| Lids | AISI 304 stainless steel |
| Baskets | Removable chrome-plated wire mesh |
| Safety drain taps | Included |
| Thermostats | Independent tank temperature controls |
| Safety thermostat | With reset button |
| Heating elements | Removable stainless steel elements |
| Support grids | Included |
| Protection rating | IP X3 |
| Electrical connection | Red 5-pin industrial plug |
| Machine dimensions | 56.5 × 52/65 × 36 cm (h) |
| Net weight | 17 kg |
| Packaging dimensions | 63 × 55.7 × 41 cm |
| Gross weight | 19 kg |
| Packaging volume | 0.172 m³ |
Each tank requires 8 to 10 litres of oil, according to the minimum and maximum levels specified by Fimar.
The 12 litres refer to the nominal tank capacity, not the amount of oil to use. The specified maximum oil level is 10 litres per tank.
Both tanks require a total of 16 to 20 litres of oil.
No. Fimar specifies a maximum of 10 litres of oil per tank. The manufacturer’s specified fill levels must be observed.
Yes. The machine has separate thermostats for independent control of the two frying zones.
No. The FR1010RN040T model requires a 400 V 3N 50/60 Hz three-phase power supply.
Total power is 12 kW, divided into 6 kW per tank.
Yes. The FR1010RN model is equipped with safety taps for draining the oil.
The operating temperature is adjustable from 50 to 180 °C.
The stated approximate time is 12 minutes under reference operating conditions.
Fimar states an output of 11 + 11 kg/h. Actual output depends on the food and operating conditions.
Yes. The body, tanks and lids are made of AISI 304 stainless steel.
Yes. The machine has removable stainless steel heating elements to make cleaning easier.
The stated dimensions are 56.5 × 52/65 × 36 cm (h), with a net weight of 17 kg.
The professional countertop configuration with two independent tanks, a total power rating of 12 kW and drain taps is intended for use in professional kitchens.