The FIMAR LCF18M is a high-capacity professional mussel washer designed for restaurants, fish shops, commercial kitchens and food preparation facilities handling substantial volumes of shellfish.
It handles approximately 10÷18 kg per load and provides a declared output of up to 220 kg/h. This version operates on 230V – 50Hz – 1N single-phase power with a rated power of 900 W and a Schuko plug.
The 0÷4 minute adjustable timer allows the operator to set the cleaning cycle according to processing requirements.
An automatic water jet helps remove residues during operation, while the product discharge button facilitates unloading after the cycle.
Standard equipment includes a removable PPC brush plate. This configuration is supplied without a side abrasive.
The machine features an AISI 304 stainless steel structure and a transparent food-grade polycarbonate upper lid. Safety microswitches are fitted to the upper lid and product outlet.
The FIMAR LCF18M is designed for installation on its dedicated stand.
The stand is not included with the machine and must be purchased separately.
Purchase of the stand is mandatory for correct installation and professional operation.
| Product code | LCF18M |
| FIMAR code | LCF18M23050M |
| Capacity | Approx. 10÷18 kg max. |
| Hourly output | 220 kg/h |
| Construction | AISI 304 stainless steel |
| Timer | 0÷4 minutes |
| Power supply | 230V – 50Hz – 1N single-phase |
| Power | 900 W |
| Plug | Schuko |
| Protection | IPX3 |
| Side abrasive | No |
| Dimensions W×D×H | 380×770×1230 mm |
| Net weight | 39 kg |
| Gross weight | 50 kg |
| Packaging | 830×530×1050 mm – 0.463 m³ |
| Equipment | Removable PPC brush plate |
| Stand | Mandatory – not included, sold separately |
| Compliance | CE |
| Origin | Italy – Made in Italy |
Approximately 10÷18 kg maximum.
The declared output is 220 kg/h.
Yes. It operates on 230V, 50Hz, 1N single-phase power.
900 W.
A Schuko plug.
Yes, from 0 to 4 minutes.
Yes.
Yes. A removable PPC brush plate is supplied.
No.
No. It must be purchased separately.
Yes. It is required for correct installation and use.
